Webcam Test

Testing Area

  • Detecting your media devices. Please wait...
  • Waiting for your permission...
  • Starting your webcam. Please wait...
  • Detecting the maximum supported resolution. Please wait...
  • For more information visit the following pages:
  • Changing the camera will reset the current process. Do you want to continue?
  • An unexpected error occurred. Reload the page and try again.
  • Could not find any media devices. It is very likely that your browser does not allow access to these devices. Try to reload this page or open it using another browser. Just remember that to start your webcam you need to allow our website to use it.
  • Could not find a web camera, however there are other media devices (like speakers or microphones). Most likely, this means that your webcam is not working properly or your browser cannot access it.
  • Your browser does not support features for accessing media devices. Please upgrade your browser or install another one.
  • You did not allow the browser to use the web camera. Reload the page and try again.
  • Apparently, your webcam is being used or blocked by another application. To start your webcam, you must temporarily close that application.
  • It looks like your browser is blocking access to webcam identifiers. Because of this, it’s impossible to detect and manage all available webcams.
  • Waiting time for your permission has expired. Reload the page and try again.
  • Cannot stream video. The cause may be a defective camera or that it is currently being used by another application.
  • The video track is paused.
  • Cannot detect any active stream of media content.
  • Your webcam does not output any video tracks.
  • Your browser does not support features for accessing video tracks.
  • Video track not available due to technical issue.
  • Your webcam suddenly stopped transmitting video track.
  • For unknown reasons, the video track is disabled.
  • Click here to allow access to webcam identifiers
  • Click here to try forcibly start the camera
  • Testing your webcam. Please wait...
  • A web camera was detected. Press “Test my cam” to check the functionality and supported properties of your camera.
  • Several web cameras were detected. To check the functionality and supported properties of your camera, select it from the list below and press “Test my cam”. Please note that in order to obtain more accurate results it is recommended to keep enabled only one webcam.
  • Testing was completed successfully. The results are displayed in the “Webcam Information” table. Please read the following tips and do not forget to leave a review about your webcam.
  • Testing was completed successfully. The results are displayed in the “Webcam Information” table. Please do not forget to leave a review about your webcam.
  • It seems your webcam shows a one-color filling. This may be due to a malfunction or third-party application that “mutes” the video stream.
  • Your webcam uses too few colors. Perhaps this is due to poor visibility or bad quality webcam.
  • Your webcam operates in grayscale mode. Some devices may use this mode to conserve battery power.
  • The room is too dark. Turn on the light or make sure that the webcam’s LED lights shine brightly.
  • The image is too bright. If you are in the operating room, it’s all right. Otherwise, try to adjust the light in the room.
  • Invalid aspect ratio (at least the image is too wide). Perhaps this is a technical defect or a software error.
  • Invalid aspect ratio (at least the image is too narrow). Perhaps this is a technical defect or a software error.
  • Unforgivable low resolution. Check your webcam settings and select a higher resolution.
  • It seems your web camera streams video as a static image. Either the webcam hangs, or as a video source, it uses regular image.
  • Our test detected a low frame rate (FPS). If you have a high-quality webcam, make sure that your system is not overloaded, and then repeat the test again.
  • During testing, there were errors due to which it is impossible to determine some parameters of your web camera. Reload the page and try again.
  • QQVGA (160x120)
  • QCIF (176x144)
  • QCIF (192x144)
  • HQVGA (240x160)
  • QVGA (320x240)
  • Video CD NTSC (352x240)
  • Video CD PAL (352x288)
  • xCIF (384x288)
  • 360p (480x360)
  • nHD (640x360)
  • VGA (640x480)
  • SD (704x480)
  • DVD NTSC (720x480)
  • WGA (800x480)
  • SVGA (800x600)
  • DVCPRO HD (960x720)
  • XGA (1024x768)
  • HD (1280x720)
  • WXGA (1280x800)
  • SXGA− (1280x960)
  • SXGA (1280x1024)
  • UXGA (1600x1200)
  • FHD (1920x1080)
  • QXGA (2048x1536)
  • QSXGA (2560x2048)
  • QUXGA (3200x2400)
  • DCI 4K (4096x2160)
  • HXGA (4096x3072)
  • UW5K (5120x2160)
  • 5K (5120x2880)
  • WHXGA (5120x3200)
  • HSXGA (5120x4096)
  • WHSXGA (6400x4096)
  • HUXGA (6400x4800)
  • 8K UHD (7680x4320)
  • WHUXGA (7680x4800)
  • UW10K (10240x4320)

Webcam Information

Webcam Name: Not selected
Quality Rating:
Built-in Microphone:
Built-in Speaker:
Frame rate:
Stream Type:
Image Mode:
Webcam MegaPixels:
Webcam Resolution:
Video Standard:
Aspect Ratio:
PNG File Size:
JPEG File Size:
Number of Colors:
Average RGB Color:
To share or save the technical information, get a unique URL by submitting a new review about your webcam.

Rate your webcam

Check out how good your web camera is!
Leave a review about your camera and find out the place in the rating of the best cameras.

Latest Testimonials

Thank you for providing this test.Eliza
This is excellent Abhimanyu kumar
Your site is helpful in testing the webcams.Ulf Alling
very best websitemasroorghazi
nice, love it.melia


This site provides a free tool to test your webcam online and check if it is working properly. In other words, you can test it directly from your browser without the need to install third-party software. Despite such an easy way, you can start testing your webcam “in one click” on different devices, including laptops, smartphones, TVs, tablets and others. Regardless of the device and the operating system, as a result of testing, you will not only know if your webcam is working, but also find out a lot of useful information about it (i.e, webcam name, resolution, frame rate, number of colors, image quality and many other specifications). In addition, if the testing tool detects any problems with your web camera, you will receive some hints on how to fix them. After completing the webcam testing, among other things, you can take photos with your webcam and download them. Also you can view it in fullscreen and rate your webcam.

Why do you need to test the camera?

  • You purchased or connected a new webcam and want to check if it works properly (the webcam viewer will display the image in real time).
  • You have doubts about the parameters of a newly purchased webcam and you want to test your webcam and its features (because not all sellers are honest).
  • You have several cameras and you want to compare them to find out which one is better (the better the camera, the higher the “Quality Rating”).
  • Want to find out if your camera has built-in microphone or built-in speaker (be aware, this feature is a little buggy).
  • Want to know how many frames per second (FPS) renders your webcam (low FPS causes video lags).
  • Want to know how many colors contains a photo taken with your webcam (more colors mean higher image quality).
  • Want to know the resolution of your web camera (high-quality webcams have high resolution and can provide HD video calls).
  • Check the quality of your webcam compared to other webcams (for this you need to leave a review about your webcam).

How to test your webcam?

Testing your webcam with our online tool is very easy: just wait until the web cameras are detected and press the “Test my cam” button. If you do not see this button and don’t receive any notifications, most likely an error occurred with your browser. To help you, please email us at

How your webcam is tested?

  1. First of all, it determines if the browser supports features for accessing media devices. If so, it displays a list of detected web cameras and necessary controls.
  2. When you press the “Test my cam” button, the browser will ask permission to launch the web camera on this site.
  3. After granting access, the camera will be launched and you will see the video in the webcam viewer.
  4. Now it’s time to determine the maximum resolution of the web camera (among other things, it will allow to calculate the number of megapixels and detect supported video standard).
  5. Next, it would determine the image quality (including number of colours, brightness, saturation).
  6. After some measurements, the number of frames per second (FPS) is determined.
  7. Among the latest tests, approximate video conferencing bandwidth is calculated.
  8. Finally are displayed the testing results, hints and additional controls (i.e, take snapshots, enable fullscreen, stop webcam, update data).

Why do you need to leave a review?

Once testing is complete, you can leave a review about your webcam. This is not required, but we encourage you to do so in order to help other people to purchase a good webcam and get around the bad ones. In addition, after publishing your review, you will see how good is your compared camera to others.

What are the system requirements for running the online webcam test?

To test your camera, all you need is a modern browser (unfortunately, Internet Explorer does not belong to them) that supports features for accessing media devices. As you noticed, this webcam testing tool does not require any additional software like Adobe Flash, Microsoft Silverlight or browser add-ons.

Below are listed the operating systems and the minimum versions of supported browsers:

  • Android
    • Firefox 56.0
    • Chrome 35.0
    • Samsung Browser 2.1
    • Opera Mobile 37.0
    • Yandex Browser 18.1
    • Android WebView 4.0
    • Silk 73.6
    • Edge 45.0
    • Vivo Browser 8.2
    • Android 4.0
  • Chrome OS
    • Chrome 45.0
  • FirefoxOS
    • Firefox 48.0
  • FreeBSD
    • Firefox 75.0
  • Linux
    • Firefox 26.0
    • Chrome 37.0
    • Chromium 65.0
    • Yandex Browser 18.1
    • Opera 45
  • macOS
    • Firefox 48.0
    • Chrome 49.0
    • Safari 11.1
    • Opera 72
  • Ubuntu
    • Firefox 44.0
    • Chromium 37.0
  • Windows 10
    • Edge 12.0
    • Chrome 50.0
    • Firefox 36.0
    • Yandex Browser 17.1
    • Opera 35.0
    • Waterfox 56.2
    • Iron 68.0
    • UC Browser 6.0
    • Opera Neon 1.0
    • Elements Browser 1.1
    • Coc Coc Browser 81.0
  • Win32
    • Chrome 49.0
    • Maxthon 5.0
  • Windows 7
    • Firefox 29.0
    • Chrome 33.0
    • Yandex Browser 16.6
    • Sogou Explorer 2.0
    • Opera 43.0
    • UC Browser 5.5
    • Edge 87.0
    • Iron 74.0
    • Coc Coc Browser 49.0
    • IceDragon 65.0
    • Amigo 58.0
  • Windows 8
    • Chrome 51.0
    • Opera 63.0
    • Firefox 69.0
    • Edge 106.0
  • Windows 8.1
    • Chrome 51.0
    • Firefox 30.0
    • Yandex Browser 18.1
    • Opera 64.0
    • Avast SafeZone 1.48
    • Edge 87.0
    • Waterfox 56.3
  • WinPhone10
    • Edge Mobile 14.0
  • Windows Vista
    • Firefox 48.0
    • Chrome 39.0
    • Opera 36.0
    • Yandex Browser 17.4
  • Windows XP
    • Chrome 49.0
    • Opera 36.0
    • Firefox 38.0
  • Xbox OS 10
    • Edge 18.0
  • iOS
    • Safari 11.0
    • Chrome 87.0
  • ipadOS
    • Safari 13.0
  • macOS
    • Safari 11.0
    • Chrome 63.0
    • Firefox 63.0
    • Opera 53
    • Edge 81.0

If your operating system or browser is not listed here, this does not mean that it is not supported. It just has not been tested yet. Therefore, feel free to check yourself.


  1. All operations necessary for testing are performed in the browser, and all data is stored only in the user’s device memory.
  2. We do not save technical information until the user posts his review.
  3. If the user does not publish the review, all data from device memory is destroyed when the page is closed.
  4. Reviews are public and contain only technical information about the tested cameras.
  5. We do not in any way store photos taken by users with their webcams.


The test results depend on various factors, which is why it is impossible to guarantee an error-free testing algorithm. Nevertheless, we will always improve our testing tool and fix any errors found. If you find any errors or you have any suggestions, please contact us at